Volkswagen developing new 3D printing process for production parts - Just Auto
Join Our Newsletter - Get important industry news and analysis sent to your inbox – sign up to our e-Newsletter here
X

Volkswagen developing new 3D printing process for production parts

By Graeme Roberts 21 Jun 2021 (Last Updated June 21st, 2021 17:30)

A new 3D printing process developed by VW, Siemens and HP reduces costs and increases productivity.

Volkswagen developing new 3D printing process for production parts
VW is first to use a new 3D printing process

Volkswagen is is using a new process known as binder jetting to manufacture components at its main plant in Wolfsburg, Germany.

While conventional 3D printing uses a laser to build a component layer by layer from metallic powder, the binder jetting process uses an adhesive. The resulting metallic component is then heated and shaped. Using the binder jetting component reduces costs and increases productivity, the components weigh only half as much as those made from sheet steel.

VW claims to be the only automaker using this 3D printing technology in the production process.

Christian Vollmer, VW brand production and logistics chief said: “Together with our partners, we aim to make 3D printing even more efficient in the years ahead and suitable for production line use.”

VW has invested “an amount in the mid-double-digit million euro range” over the past five years in 3D printing. It has expanded an existing collaboration with HP which is providing the high-tech printers needed and Siemens supplies the software for additive manufacturing. A key process step worked on jointly by Siemens and VW is optimising the positioning of components in the build chamber. Known as nesting, this technique makes it possible to produce twice as many parts per print session.

From summer, the three companies intend to establish a joint team at the 3D printing centre in Wolfsburg. The centre also trains employees in the use of these technologies.

By 2025, the aim is to produce up to 100,000 components by 3D printing each year. The first components made using the binder jetting process have gone to Osnabrueck for certification: components for the A pillar of the T-Roc convertible. These weigh almost 50% less than conventional components made from sheet steel.

VW has already successfully conducted crash tests on 3D-printed metallic vehicle components. Until now, the production of larger volumes was not cost-effective enough. However, the new technology and the collaboration will now make production-line use economically viable.